 Plugs from the battery to the power switch. Attach to positive ring terminal from the connecting harness to the positive terminal on the battery. The positive terminal contains a fuse. Connect the negative ring terminal from the connecting harness to the negative terminal on the battery. Plug the other end into the power switch or controller. Lifetime warranty. |
More info ›› |
|
 Regulates heat on two heated products independently. 3-year warranty. |
More info ›› |
|
 Replacement armor is CE approved. High-impact, resistant polymer. Designed to fit all jackets made to hold back armor. |
More info ›› |
|
 This perforated kidney belt is designed for maximum support and comfort. To use just pull the belt through the jacket or liner and adjust for a comfortable fit. Fits mens and womens FXRG® jackets. |
More info ›› |
|
 Harley-Davidson® Leather Dressing assures you the most effective weatherproofing and preservative action for your leather products such as saddlebags, tank panels, gear and apparel. Specially formulated for smooth, oil tanned leather. |
More info ›› |
|
 This replacement armor is CE approved. High-impact, resistant polymer, hook-and-loop touch closure. Designed to fit FXRG® jackets and pants. Comes in packs of two. |
More info ›› |
|
 Regulates heat for the Harley-Davidson® heated clothing line. New, smaller size. 3-year warranty. |
More info ›› |
|
 The on/off switch plugs between connecting harness and garment being worn. Lifetime warranty. |
More info ›› |
|
 Stylish 3-in-1 denim jacket features a removable hooded cotton/poly vest for extra warmth that can be worn separately. Complete with mandarin collar, zipper front, button cuffs, and adjustable button waist tabs. Two hand-warmer pockets and embroidered graphics on chest. 98% cotton, 2% spandex. |
More info ›› |
|
 71% nylon, 29% polyester. 100% poly-mesh lining. Mandarin collar. Zipper front. Zipper cuffs. Zipper gussets on lower back. Three zipper exterior pockets and two inside pockets. Embroidered graphics on left chest. Embroidered graphics with rhinestone embellishment on back. |
More info ›› |
|
 100% cotton with poly-mesh lining. Snap-tab mandarin collar. Zipper front. Snap cuffs. Two zipper hand-warmer pockets. Ruching on back waist. Embroidered graphics down sleeves and embroidered applique on back. |
More info ›› |
|
 Lightweight leather jacket with mandarin collar and two-way zipper front. 100% polyester twill fixed lining. Body armor pockets at elbows and shoulders fit lightweight body armor available in the FXRG® line. Features action back for additional comfort, slightly pre-curved sleeves, and zipper cuffs. Complete with two zipper hand-warmer pockets and one inside zipper vertical pocket. Embroidered graphics on left chest and on back. |
More info ›› |
|
 Water-resistant nylon with poly-mesh lining. Removable, zip-out 95% polyester, 5% spandex full sleeve fleece hoodie for extra warmth can also be worn separately. Features extended cuffs with thumbholes. Two front shoulder intake vents and two vertical back exit vents. Removable lightweight body armor at shoulders and elbows. Mandarin collar, zipper front and slightly pre-curved sleeves with zipper cuffs. Adjustable buckle waist tabs. |
More info ›› |
|
 100% polyester fleece jacket has contrast stripe down sleeves. Features two zipper hand-warmer pockets and draw cord at waist for cinching. Embroidered graphics down sleeves, on lower left waist, and on back. |
More info ›› |
|
 100% polyester fleece jacket has contrast stripe down sleeves. Features two zipper hand-warmer pockets and draw cord at waist for cinching. Embroidered graphics down sleeves, on lower left waist, and on back. |
More info ›› |
|
 Lightweight leather jacket with poly-mesh lining. Features two front shoulder vents, two vertical back exit vents, and body armor pockets at elbows and shoulders. Snap-tab mandarin collar. Two-way zipper front. Action back. Zipper cuffs. Two zipper hand-warmer pockets and two interior pockets. 3M™ Scotchlite™ Reflective Material piping. Embroidered graphics on sleeves, front left hem, and back neck. |
More info ›› |
|
 Stand-up collar with contrasting zipper front. Two zipper hand-warmer pockets and one interior pocket. Embroidered graphics on left chest and back. 53% nylon, 47% polyester with down filling. 100% poly-satin lining. |
More info ›› |
|
 Water-resistant 59% nylon, 41% cotton with poly-mesh lining. Features a snap-tab mandarin collar, zipper front and zipper cuffs. Two zipper hand-warmer pockets and one interior pocket. Distressed printed appliqu� graphics with rhinestone embellishment on left chest and back. |
More info ›› |
|
 Lightweight leather with poly-satin fixed lining. Body armor pockets at elbows and shoulders. Snap-tab mandarin collar. Zipper front. Action back. Slightly pre-curved sleeves. Zipper cuffs. Two zipper hand-warmer pockets, one zipper chest pocket, and two interior pockets. Embroidered appliqu� graphics with rhinestone embellishment on right sleeve and back. |
More info ›› |
|
 Water-resistant and windproof 94% polyester and 6% spandex. Features a mock neck collar, zipper front, and two zipper hand-warmer pockets. Embroidered graphics on left chest and back. |
More info ›› |
|
 Guardian Technology at elbows and shoulders for added abrasion resistance. Body armor pockets at elbows and shoulders fit lightweight body armor available in the FXRG® line. Zipper front with bungee cord and toggle hood. Ergonomic zipper pulls and two zipper hand-warmer pockets. Elastic binding around cuffs and waist. 3M™ Scotchlite™ Reflective Material piping. Embroidered and appliqué graphics on front. 100% polyester fleece. |
More info ›› |
|
 This waterproof leather jacket with fixed CoolMax® lining features wind- and waterproof c_change™ membrane technology from Schoeller® reacts to body temperature and moisture levels to ensure an optimum body climate. Removable, lightweight and breathable Primaloft® warmth liner can also be worn separately as a light jacket. Shoulder vents, two vertical side vents and two vertical back vents. Removable, CE-approved lightweight body armor at elbows, shoulders, and back. Snap-tab mandarin collar. YKK® Finguard® front zipper with re-designed zipper pull. Removable kidney belt. Action back. Pre-curved sleeves with zipper cuffs. Adjustable waist. Pull-tab snaps allow easy installation of Heated Jacket Liner, 98351-09VW (sold separately). Two zipper hand-warmer pockets. Interior pocket system with two zipper pockets, a cargo pocket, cell phone pocket, and eyewear pocket with lens wipe. 3M™ Scotchlite™ Reflective Material piping and inlays on front, back and sleeves. 5-year warranty. |
More info ›› |
|
 100% polyester mesh with poly-mesh lining. Body armor pockets at elbows and shoulders fit lightweight body armor available in the FXRG® line. Mandarin collar. Zipper front. Action back. Adjustable waist and cuff tabs. Hydration pockets fit Hydration Packs sold separately. Two zipper hand-warmer pockets and two zipper interior pockets. 3M™ Scotchlite™ Reflective Material inset panels on front and back. Embroidered graphics on front chest. 3M™ Scotchlite™ Reflective Material graphics on back. |
More info ›› |
|
 Exclusive 360° Enhanced Visibility Reflective design helps rider be seen from nearly every angle. Waterproof 100% nylon with poly-mesh lining. Zip-out, removable quilted Thinsulate™ vest liner. Two front vents and two back vents. Body armor pockets at elbows, shoulders, and back. Snap-tab mandarin collar with microfiber lining. Two-way zipper front with waterproof storm flap. Action back. Slightly pre-curved sleeves. Zipper cuffs. Two back zipper gussets. Adjustable waist tabs. |
More info ›› |
|
 3-in-1 styling for extra versitility. Midweight leather jacket with poly-mesh lining. Removable poly/spandex fleece hoodie with extended cuffs with thumb holes that cover the hand to block air from blowing up the sleeve. Shoulder and vertical back vents to cool things off. Body armor pockets at shoulders and elbows. Mandarin collar, two-way zipper front, action back, and slightly pre-curved sleeves. Two-way zipper cuffs, two zipper hand-warmer pockets, and two inside pockets. |
More info ›› |
|
 Stand-up collar with contrasting zipper front. Two zipper hand-warmer pockets and one interior pocket. Embroidered graphics on left chest and back. 53% nylon, 47% polyester with down filling. 100% poly-satin lining. |
More info ›› |
|
 Midweight leather jacket with poly-mesh body lining with poly-twill arm lining. Removable, zip-out poly/spandex fleece hoodie for extra warmth can also be worn separately, and features extended cuffs with thumbholes that cover the hands and prevent air from blowing up sleeves. Under arm grommet venting, front shoulder and vertical back vents. Body armor pockets at elbows and shoulders. Features mandarin collar, two-way zipper front with snap-tab at waist, action back, slightly pre-curved sleeves |
More info ›› |
|
 Exclusive to the Pink Label Collection. Lightweight leather jacket with poly-twill fixed lining. Snap-tab mandarin collar. Zipper front. Action back. Zipper cuffs. Two zipper hand-warmer pockets, one zipper chest pocket, and two inside pockets. Embroidered graphics on left chest. Embroidered Bar Shield logo on back neck. |
More info ›› |
|
 Midweight leather with poly-mesh lining. Removable, full-sleeve Thinsulate™ liner. Two front intake vents and two vertical back exit vents. Removable, lightweight body armor at elbows and shoulders. Snap-tab mandarin collar. Two-way zipper front. Action back. Slightly pre-curved sleeves. Zipper cuffs. Adjustable waist tabs. Power-stretch side panels. Two zipper hand-warmer pockets and two interior pockets. 3M™ Scotchlite™ Reflective Material piping. 3M Scotchlite™ Reflective Material inlay with embroidered graphics on left chest and back. |
More info ›› |
|
 The must-have 3-in-1 jacket built with the road in mind. Midweight leather jacket with poly-mesh lining loaded with shoulder and horizontal back vents. Removable poly/spandex fleece hoodie with extended cuffs with thumb holes that cover the hand to block air from blowing up the sleeve. Body armor pockets at elbows and shoulders. Features a mandarin collar, two-way zipper front, action back, slightly pre-curved sleeves, and two-way zipper cuffs. Complete with two zipper hand-warmer pockets and two inside pockets. Separate interior pocket system with three waterproof pockets, waterproof cell phone pocket, and waterproof, cushioned MP3 player pocket. 3M™ Scotchlite™ Reflective Material piping on front and back for greater visibility. 3M™ Scotchlite™ Reflective Material and embroidered appliqué graphics on right sleeve, front, and back. Fleece hoodie features two hand-warmer pockets, and embroidered graphics on left chest and right sleeve. |
More info ›› |
|
 Lightweight leather with poly-mesh lining. Removable, quilted vest liner. Body armor pockets at elbows and shoulders fit lightweight body armor available in the FXRG® line. Rolled collar with hidden snaps. Two-way zipper front. Action back. Slightly pre-curved sleeves. Zipper cuffs. Zipper back gussets. Two zipper hand-warmer pockets and two inside pockets. Leather applique and embroidered graphics on front and right sleeve. Embroidered applique with printed graphics on back. |
More info ›› |
|
 100% polyester knit mesh. Body armor pockets at elbows and shoulders fit lightweight body armor available in the FXRG® line. Mandarin collar. Zipper front. Hook-and-loop cuffs. Adjustable waist tabs. Hydration pockets fit Hydration Packs sold separately. Two zipper hand-warmer pockets and two inside pockets. 3M™ Scotchlite™ Reflective Material piping on front and back. Embroidered graphics on left chest. 3M™ Scotchlite™ Reflective Material appliqué and embroidered graphics on back. |
More info ›› |
|
 Lightweight leather with poly-mesh lining. Two front shoulder vents and two vertical back vents. Body armor pockets at elbows and shoulders. Snap-tab mandarin collar. Two-way zipper front. Action back. Slightly pre-curved sleeves. Zipper cuffs. Two zipper hand-warmer pockets and two interior pockets. Embroidered appliqu� graphics on left chest. Embroidered leather appliqu� graphics on back. |
More info ›› |
|
 Made from durable nylon/cotton twill. Harley-Davidson® embroidered applique graphics across front chest. Zipper front. Two colored stripes down both sleeves. Two front zipper hand-warmer pockets. |
More info ›› |
|
 Waterproof seam-sealed 100% polyester fleece. Jacket features a zipper front with bungee cord and toggle hood. Watertight storm cuffs, toggle cinch at hem, and two zipper hand-warmer pockets. Contrasting accent piping and embroidered graphics on front. |
More info ›› |
|
 Use to connect heated vest, pants and gloves when worn at the same time. Lifetime warranty. |
More info ›› |
|
Bookmark Us At 
