|
|
|
|
|
|
|
|
|
|
|
|
|
|
3/4 Helmet Replacement Face Shield Fits 3/4 Helmet with Retractable Sun Shield P/N 98210-10VM. AccuSight™ anti-fog face shield features optically superior 3D design, 95% UV protection, and anti-scratch coating.
|
Bar & Shield Logo Belt Bag Nylon bag clips around the waist with adjustable strap. Spacious zipper main compartment includes key clip and is ideal for stashing cell phone, eyewear, or small wallet. Smaller zipper front pocket fits lip balm, change, credit cards, or driver's license. Embroidered Bar Shield logo on front. Measures approximately 10" x 6 1/2" x 3 1/2".
|
Bar & Shield Logo Biker Chain Metal 19" biker chain with two snap hooks for attaching to belt loops or biker wallet. Engraved snap hook. Sculpted and engraved Bar Shield logo medallion.
|
Bar & Shield Logo Bottle Opener Metal bottle opener with rubber coating for better grip. Printed Bar Shield logo on front. Measures 7" x 1 5/8". Hand wash only.
|
Bar & Shield Logo Business Card Holder Durable fiberboard construction. Bar Shield logo medallion on front. Allover Bar Shield logo print inside. Measures 4"W x 1 3/4"H x 1 1/2"D.
|
Bar & Shield Logo Double Old Fashion Add to your barware with this 14 oz. glass featuring the Bar Shield logo. Dishwasher safe and made in the USA.
|
Bar & Shield Logo Essentials Balaclava Lightweight, stretchable Wind Pro® fleece is 80% wind-resistant and soft to the skin. Wear alone or under any helmet. Embroidered Bar Shield logo graphics.
|
Bar & Shield Logo Essentials Ear Warmer Lightweight, stretchable Wind Pro® fleece is 80% wind-resistant and soft to the skin. Wear alone or under any helmet. Embroidered Bar Shield logo graphics.
|
Bar & Shield Logo Essentials Face Mask Neoprene with lightweight, stretchable Wind Pro® fleece is 80% wind-resistant. Wear alone or with any helmet. Embroidered Bar Shield logo graphics.
|
Bar & Shield Logo Essentials Hat Lightweight, stretchable Wind Pro® fleece is 80% wind-resistant and soft to the skin. Wear alone or under any helmet. Embroidered Bar Shield logo graphics.
|
Bar & Shield Logo Essentials Neck Gaiter Lightweight, stretchable Wind Pro® fleece is 80% wind-resistant and soft to the skin. Pull the tube up to cover your ears and nose, or keep it down around your neck. Embroidered Bar Shield logo graphics.
|
Bar & Shield Logo Large Pilsner Spruce up your barware with this 23 oz. glass pilsner with Bar Shield logo. Dishwasher safe and made in the USA.
|
Bar & Shield Logo Leather Coasters Set Set of four. Genuine leather. Embossed Bar Shield logo. Measures 3 1/2" in diameter.
|
Bar & Shield Logo Money Clip Full-grain leather with raw-edge construction. Magnetic closure. Not recommended for use with credit cards because of strong magnet. Holds most paper currencies. Sculpted Bar Shield medallion. Measures 1 1/2" x 2 5/8".
|
Bar & Shield Logo Mug Add to your barware with this 15 oz. glass mug featuring the Bar Shield logo. Dishwasher safe and made in the USA.
|
Bar & Shield Logo Pencil Cup Durable fiberboard construction. Bar Shield logo medallion on front. Allover Bar Shield logo print inside. Measures 2 3/4"W x 4"H x 2 3/4"D. Pencils not included.
|
Bar & Shield Logo Sculpted Mug 18 oz. ceramic mug with sculpted Bar Shield logo on front. Dishwasher and microwave safe.
|
Bar & Shield Logo Shot Glass Spruce up your barware with this 2 oz. shot glass with the Bar Shield logo. Dishwasher safe and made in the USA.
|
Bar & Shield Logo Travel Mug 16 oz. insulated stainless steel with Bar Shield logo on front and back. Not microwave safe. Hand wash only.
|
Bar & Shield Logo with Wings Mug 14 oz. ceramic mug with sculpted graphics on front and back. Dishwasher and microwave safe.
|
Bar & Shield Logo with Wings Tin Sign Embossed tin sign. Measures 7" x 23". Made in the USA.
|
Chrome Bar & Shield Logo Frame Chrome frame. Engraved Bar Shield logo with black fill on front. Holds 4" x 6" photo.
|
Connecting Harness Plugs from the battery to the power switch. Attach to positive ring terminal from the connecting harness to the positive terminal on the battery. The positive terminal contains a fuse. Connect the negative ring terminal from the connecting harness to the negative terminal on the battery. Plug the other end into the power switch or controller. Lifetime warranty.
|
Dual Control Thermostat Regulates heat on two heated products independently. 3-year warranty.
|
Eagle Vest Extender Set of two. 100% genuine leather with iron chain. Eagle graphics on metal snap covers. Measures 6" end to end.
|
FXRG® Kidney Belt Replacement This perforated kidney belt is designed for maximum support and comfort. To use just pull the belt through the jacket or liner and adjust for a comfortable fit. Fits mens and womens FXRG® jackets.
|
Hog Bank - Large The popularity of this ceramic bank is legendary. Black glazed bank features a two-tone tank decal. Measures approximately 11" long x 7" high for the large bank, and 6 1/4" long x 4" high for the small bank.
|
Hog Bank - Small The popularity of this ceramic bank is legendary. Black glazed bank features a two-tone tank decal. Measures approximately 11" long x 7" high for the large bank, and 6 1/4" long x 4" high for the small bank.
|
Jet II Replacement Face Shield - Clear Fits the Jet II helmet. Scratch resistant. No tools required. Tinted shields are for daytime use only.
|
Jet II Replacement Face Shield - Tinted Fits the Jet II helmet. Scratch resistant. No tools required. Tinted shields are for daytime use only.
|
Men's 1/4-Zip Sleeve Stripe Shirt 100% heavy cotton flat back rib pullover with 1/4-zipper front and colorblock stripe detail on sleeves. applique graphics on front and embroidered graphics on back neck.
|
Men's 3/4 Helmet with Retractable Sun Shield - Gloss Black Polycarbonate shell featuring an Advanced Channeling Ventilation System, which allows for full front-to-back airflow to help flush out heat and humidity. One-Touch Integrated tinted SunShield deploys quickly and easily. AccuSight™ anti-fog face shield features optically superior 3D design, 95% UV protection, and anti-scratch coating. RapidFire™ shield replacement system for quick, secure tool-free removal and installation. Gloss Black
|
| Men's 3/4 Helmet with Retractable Sun Shield - Matte BlackPolycarbonate shell featuring an Advanced Channeling Ventilation System, which allows for full front-to-back airflow to help flush out heat and humidity. One-Touch Integrated tinted SunShield deploys quickly and easily. AccuSight™ anti-fog face shield features optically superior 3D design, 95% UV protection, and anti-scratch coating. RapidFire™ shield replacement system for quick, secure tool-free removal and installation. Gloss Black
|
Men's Air Flow Full-Finger Gloves Lightweight fabric gloves with pigskin leather palm. Stretch forchettes. Adjustable hook-and-loop wrist closure with Bar & Shield logo.
|
Men's American Legend Stretch Baseball Cap Embroidered graphics on front. Stretch fit. 97% cotton, 3% spandex with enzyme wash.
|
Men's Axle Half Helmet Polycarbonate shell. Double D-ring chin strap. Fixed liner. Fits PA Helmet Headset and Road Tech™ Helmet Headset with Bluetooth® 2.0 Technology (P/N 98272-09VM) using Helmet Communication Pouch (P/N 98252-07V). Helmet bag included. Custom skull graphics on front. Meets DOT requirements. KBC®, 1 lb. 14 oz.
|
Men's Bar & Shield Logo Boneyard Half Helmet Aramid® and fiberglass shell. Double D-ring chin strap. Removable, washable CoolMax® moisture-wicking liner. Fits PA Helmet Headset and Road Tech™ Helmet Headset with Bluetooth® 2.0 Technology (P/N 98272-09VM) using the Helmet Communication Pouch (P/N 98252-07V). Helmet bag included. Embossed skull graphics on front. Meets DOT requirements. KBC®, 1 lb. 13 oz.
|
Men's Bar & Shield Logo Buckle Nickel finish buckle features Bar & Shield logo. Fits any 1 1/2"Harley-Davidson® belt strap. Measures 3 1/8" x 2 3/8".
|
Men's Bar & Shield Logo Cloth Ivy Cap 100% cotton. Six-panel styling. Pre-curved bill. Embroidered Bar Shield logo on front.
|
Men's Bar & Shield Logo Compression Bag Water-resistant nylon. Compression design helps squeeze out extra air to save space. Designed to pack almost any gear. Printed graphics on center front. Measures 22" x 17" x 24".
|
Men's Bar & Shield Logo Denim Jacket 100% cotton denim. Classic jean jacket styling. Button front and cuffs. Adjustable button waist tabs. Two hand-warmer pockets and two button chest pockets. Embroidered Harley-Davidson® graphics on left chest. Embroidered graphics on back. Embossed leather patch at back waist.
|
Men's Bar & Shield Logo Denim Vest 100% cotton denim. Classic denim vest styling. Post-button front. Adjustable button waist tabs. Two hand-warmer pockets and two button chest pockets. Embroidered Harley-Davidson® graphics on left chest. Embroidered graphics on back. Embossed leather patch at back waist.
|
Men's Bar & Shield Logo Fitted Baseball Cap Stretch twill. Embroidered graphics on front.
|
Men's Bar & Shield Logo Flames Tri-Fold Deluxe Biker Wallet Full-grain, cowhide leather with raw-edge construction. Heavy-duty 19" biker chain with snap leather leash and dog snap. ID window, six credit card slots, and three cash compartments that hold most paper currencies. Embossed Bar & Shield logo with flame design on front. Measures 7" x 4".
|
Men's Bar & Shield Logo Flip Fold Wallet Full-grain leather with raw-edge construction. Removable pass case has two ID windows. Interior features four credit card slots and two cash compartments that hold most paper currencies. Debossed Bar Shield logo on front. Measures 4 1/2" x 3 1/2".
|
Men's Bar & Shield Logo Nylon Jacket 100% UV-resistant nylon with water resistant coating. Two front inset pockets and one patch pocket. Zippered front and zippered cuffs. Rib-knit collar and waistband. Embroidered Bar Shield logo applique on back and Harley-Davidson® embroidery around the shoulders.
|
Men's Bar & Shield Logo Nylon Jacket Perfect for cool nights at the local hot spot. Rib knit collar and waist. Two front inset pockets and one patch pocket. Convenient coin pocket and secure inside pocket. Embroidered Bar Shield applique on back and Harley-Davidson® embroidery around the shoulder armholes.
|
Men's Bar & Shield Logo Tri-Fold Biker Wallet Full-grain, cowhide leather. Heavy-duty 19" biker chain with snap leather leash and dog snap. ID window plus credit card storage, and cash compartment that holds most paper currencies. Embossed Bar Shield logo on front. Measures 4 1/2" x 3 1/2".
|
Men's Bar & Shield Logo Tri-Fold Short Wallet Genuine full-grain leather. ID window and credit card slots. Cash compartment holds most paper currencies. Embossed Bar & Shield logo on front. Measures 4 1/2" x 3 1/2".
|
Men's Bar & Shield Logo Waterproof Hoodie Waterproof seam-sealed 100% knit polyester fleece in a new softer fabric with laminated backing. Guardian Technology at elbows and shoulders for added abrasion resistance. Zipper front with bungee cord and toggle hood. Hoodie features watertight storm cuffs, adjustable bungee cord hem, and two zipper kangaroo-style pockets. 3M™ Scotchlite™ Reflective Material appliqué piping at shoulders and elbows.
|
Men's Bar & Shield Logo Wheeled Backpack Main zipper pocket features three card slots, one mesh pocket, and three pen slots. Two exterior zipper pockets. Mesh helmet pocket expands to store half helmet or simply tighten adjustable straps to compact the mesh helmet pocket when not in use. ID window on back. Adjustable waist strap. Wheeled with collapsible handle for easy transport. Zipper flaps cover wheels and handle while carrying on back. Printed graphics on front. Measures 14" x 10" x 8". 100% dobby polyester.
|
Men's Bar & Shield Logo Wheeled Duffle Bag Main zipper compartment features adjustable sectional dividers. Interior zipper pocket features pull-out helmet bag. Side zipper compartment features eyewear pocket and three card slots. Additional zipper pocket on front. Two straps to attach bag to back of bike. Collapsible handle for easy storage. Wheeled for easy transport. Printed graphics on front and side. Measures 25" x 18" x 13". 100% dobby polyester.
|
Men's Bar & Shield Logo with Wings Stretch Baseball Cap Stretch fit. Embroidered graphic on side panel and Winged Bar Shield logo embroidered graphics on front. Brushed cotton/poly twill.
|
Men's Blowout with Winged Bar & Shield Logo 100% cotton twill. Snap-down collar. Button front. Left chest pocket. Printed graphics on chest pocket and back.
|
Men's Canal Street Rain Suit Don't let the weather determine when you ride. This microdenier waterproof, seam-sealed jacket is made of ultra light fabric with a zipper front so it packs neatly into the hood for easy storage in saddlebags. Features a draw-cord waist, heat shield on the inner legs, reflective piping, a helmet-friendly hood, and Harley-Davidson® graphics.
|
Men's Circle Skull Knit Cap Add to your skull collection with this 100% acrylic cap featuring a debossed skull graphic on front. One size fits most.
|
Men's Classic Boot Cut Jeans 100% 12.75 oz. cotton denim. Classic five-pocket jeans styling. Features a dark slightly tinted wash with distressed sandblasting on thighs. Sits just below the natural waist. Slimmer through seat and thighs. Boot cut leg opening. Unique left side coin pocket for rider convenience. Harley-Davidson® back pocket embroidery. Embossed Bar Shield logo leather patch on back waist. Available in 30", 32", 34" and 36" inseams.
|
Men's Classic Boot Cut Jeans 100% 12.75 oz. cotton denim. Classic five-pocket jeans styling. Features a dark slightly tinted wash with distressed sandblasting on thighs. Sits just below the natural waist. Slimmer through seat and thighs. Boot cut leg opening. Unique left side coin pocket for rider convenience. Harley-Davidson® back pocket embroidery. Embossed Bar Shield logo leather patch on back waist. Available in 30", 32", 34" and 36" inseams.
|
Men's Classic Cruiser Rain Pant Designed to complement the Classic Cruiser Rain Jacket, these pants are made with waterproof nylon ripstop to help keep light rain from ruining a good ride. Extended heat-resistant shields on inner legs. Elastic waist with adjustable tabs. Stirrups and articulated knees. Full leg two-way side zipper. Reflective piping down legs.
|
Men's Classic Embossed Strap Full-grain leather. Made with snaps for interchanging any Harley-Davidson® buckle. Embossed Harley-Davidson® graphics on back center of strap. Made in the USA.
|
Men's Classic Traditional Fit Jeans 100% 12.75 oz. cotton denim. Classic five-pocket jeans styling. Features a dark slightly tinted wash with distressed sandblasting on thighs. Sits at natural waist. Slimmer fit through seat and thighs. Slight taper to the ankle. Unique left side coin pocket for rider convenience. Harley-Davidson® back pocket embroidery. Embossed Bar Shield logo leather patch on back waist. Available in 30", 32", 34" and 36" inseams.
|
Men's Colorblock Knit Cap 100% cotton. Embroidered graphics on front. One size fits most.
|
Men's Complete Nylon Jacket 100% nylon jacket with mandarin collar, zipper front, and zipper cuffs. Two front zipper hand-warmer pockets. Detailed decorative seaming. Action back for ease of movement. Embroidered applique graphics on both sleeves and embrodiered Bar & Shield logo on the left chest.
|
Men's Cotton Skull Ivy Cap 100% cotton. Cotton lining. Embroidered graphics on front. Fitted styling.
|
Men's Cuffed Knit Cap 100% acrylic. Harley-Davidson® embroidered graphics on front cuff. One size fits most.
|
Men's Cutout Bar & Shield Logo Fob Top-grain leather key fob. Split ring for keys. Snap hook attaches to a belt loop. Sculpted Bar & Shield medallion with antique silver finish. Measures 4" x 2 1/8".
|
Men's Denim Blowout 100% cotton denim. Snap-down collar. Button front. Two button chest pockets. Custom neck tape. Printed graphics on left chest and upper back.
|
Men's Eagle Banner Buckle Zinc aluminum casting. Sculpted and engraved graphics. Fits any 1 1/2" Harley-Davidson® belt strap. Measures 5" x 3".
|
Men's Eagle Leather Skull Cap Full-grain leather with cotton twill lining. Reinforced back leather ties for added strength. Winged Bar Shield logo on front. Leather clean only.
|
Men's Embossed Bar & Shield Logo Belt 100% genuine leather. 1 1/2" wide strap. Embossed Bar Shield logos on strap. Detachable engraved buckle. Made in USA.
|
Men's Embroidered Baseball Cap 100% cotton herringbone twill. Embroidered graphics on front. Adjustable back closure.
|
Men's Embroidered Flat Top Cap 100% cotton with cotton lining. Embroidered graphics on front and Bar & Shield logo on back. Adjustable back closure.
|
Men's Embroidered Flat Top Cap Embroidered graphic on front and Bar Shield logo on back. Adjustable back closure. 100% cotton.
|
Men's Embroidered Flat Top Cap 100% cotton with cotton lining. Embroidered graphics on front and Bar & Shield logo on back. Adjustable back closure.
|
Men's Flame Bar & Shield Logo Knit Cap 55% acrylic, 45% cotton. Printed flame Bar Shield logo on front. One size fits most.
|
Men's Flame Buckle Sculpted flame buckle with high-polished finish. Fits any 1 1/2" Harley-Davidson® belt strap. Measures 5 3/4" x 2".
|
Men's Flame Graphic Baseball Cap - Black 100% washed cotton twill. Embroidered flame Bar Shield logo on front. Adjustable back closure. - Black
|
Men's Flame Knit Cap Knit-in flame design with Harley-Davidson® embroidered graphics on front. One size fits most. 55% acrylic, 45% cotton.
|
Men's Flames Nylon Bomber Jacket Stay cool and dry in this UV-resistant and water-resistant 100% nylon jacket. Complete with zipper cuffs, rib-knit collar and waistband, and two zipper hand-warmer pockets. Embroidered graphics on chest, sleeves and back.
|
Men's Flames Nylon Jacket 100% Cordura® nylon with polyester quilted lining. Mandarin collar. Zipper front. Zipper cuffs. Action back. Adjustable waist buckles. Two zipper hand-warmer pockets. Embroidered appliqu� graphics on sleeves. Embroidered graphics on left chest and back. Padding at shoulders and back waist.
|
Men's Fleece Glove Liner 100% polyester fleece adds an extra layer of warmth. Fits under most gloves.
|
Men's Frayed Bar & Shield Logo Baseball Cap - Black Frayed patch with embroidered Bar Shield logo on front. Adjustable back closure. 100% pigment-dyed cotton twill. - Black
|
Men's Frayed Bar & Shield Logo Baseball Cap - Vintage Orange Frayed patch with embroidered Bar Shield logo on front. Adjustable back closure. 100% pigment-dyed cotton twill. - Vintage Orange
|
Men's Frayed Bar & Shield Logo Patch Baseball Cap - Black 100% pigment-dyed cotton twill. Frayed patch with embroidered Bar Shield logo on front. Adjustable back closure. - Black
|
Men's Frayed Bar & Shield Logo Patch Baseball Cap - Blue 100% pigment-dyed cotton twill. Frayed patch with embroidered Bar Shield logo on front. Adjustable back closure. - Blue
|
Men's Full-Finger Mesh Gloves Lined stretch nylon mesh gloves feature power stretch across the knuckles, pre-curved fingers, and ergonomic thumb. Hook-and-loop closure, reflective piping, and Harley-Davidson® Bar Shield graphic.
|
Men's FXRG® Leather & Textile Overpant Heat and sunlight deflecting, waterproof leather combined with strategically placed stretch Cordura® for maximum comfort and reduced garment weight (12% lighter). Leather deflects up to 80% of sunlight to stay cooler longer. Fixed CoolMax® lining. Wind- and waterproof c_change™ membrane technology from Schoeller® reacts to body temperature and moisture levels to ensure an optimum body climate. Angled thigh vents. Removable, CE-approved lightweight body armor at knees and back hip. Stretch Cordura® inner thigh and back knee panels for comfort. Pre-curved knee panels. Front zipper with adjustable waist. Zipper leg openings with gussets. Zipper waist attaches to all men's FXRG® Jackets. Two front jean-style pockets. 3M™ Scotchlite™ Reflective Material piping. Graphics down right thigh and on back waist. Available in 32" and 34" inseams. 5-year warranty.
|
Men's FXRG® Midweight Leather Jacket This functional, midweight, waterproof leather jacket has a fixed CoolMax® lining and wind- and waterproof c_change™ membrane technology from Schoeller® that reacts to body temperature and moisture levels to ensure an optimum body climate. Removable, lightweight and breathable Primaloft® warmth liner can also be worn separately as a light jacket. Two large vertical front and one horizontal back vent. Removable, CE-approved lightweight body armor at elbows, shoulders, and back. Pull-tab snaps allow easy installation of Heated Jacket Liner, 98234-09VM. Interior pocket system with two zipper pockets, a cargo pocket, cellphone pocket, and eyewear pocket with lens wipe. Two zipper hand-warmer pockets. YKK® Finguard® front zipper with re-designed zipper pull. Features removable kidney belt, action back, pre-curved sleeves with zipper cuffs, snap waist tabs and snap-tab mandarin collar. 3M™ Scotchlite™ Reflective Material piping. Graphics on front and back. 5-year warranty.
|
Men's Genuine Motorcycles Baseball Cap - Black 100% brushed cotton twill. Colorblocked design with embroidered graphics on front and woven label on back. Adjustable back closure. - Black
|
Men's Genuine Oil Patch Baseball Cap - Black 100% washed cotton. Pigment dyed twill. Frayed and distressed patch on front. Frayed and distressed bill. Adjustable back closure. - Black
|
Men's Genuine Oil Patch Baseball Cap - Olive 100% washed cotton. Pigment dyed twill. Frayed and distressed patch on front. Frayed and distressed bill. Adjustable back closure. - Olive
|
Men's Genuine Oil Patch Baseball Cap - Stone 100% washed cotton. Pigment dyed twill. Frayed and distressed patch on front. Frayed and distressed bill. Adjustable back closure. - Black
|
Men's Genuine Oil Patch Baseball Cap - Vintage Orange 100% washed cotton. Pigment dyed twill. Frayed and distressed patch on front. Frayed and distressed bill. Adjustable back closure. - Vintage Orange
|
Men's Half Helmet with Retractable Sun Shield Polycarbonate shell. Double D-ring chin strap. Removable, washable inner liner. Pull down retractable sun visor. Fits P&A Helmet Headset and Road Tech™ Helmet Headset with Bluetooth® 2.0 Technology (P/N 98272-09VM) using the Helmet Communication Pouch (P/N 98252-07V) sold separately. Helmet bag included. Bar & Shield logo graphic on sides. Meets DOT requirements. HJC, 2 lbs. 3 oz. Replacement visor: 98207-10VR. Replacement Sun Shields: 98212-10V and 98208-10V.
|
Men's Heated Gloves The Heated Gloves feature Microwire™ heating technology, a patented process of using micro-sized stainless steel fibers that are intertwined and encased in a Teflon® coating. The Microwire™ is woven into a heating matrix within the glove and provides consistent heat coverage to the entire length of each finger, including the thumb as well as the back of the hand. 100% Genuine Leather gloves with waterproof, breathable Aquatex™ lliner. Electrical plug-ins built into gauntlet cuff. Includes connecting harness, power switch, and three prong harness to go up jacket sleeves. Can be worn alone or with other heated clothing. Padded palms, drawcord closure and graphics in contrasting colors. One-year limited warranty on garment. Lifetime warranty on heating elements.
|
Men's Heated Pant Liner A completely reengineered heating system integrates Nanowire™ technology and a GHC High Density Heat® system. Nanowire™ technology features a patented process of using silvered fibers stitched into a fabric and then waterproof sealed. This heating system is strategically placed throughout the garment to provide intense, but uniform heat coverage. Heated liner can be worn under pants like thermal underwear. Includes instruction manual, wiring, power switch, and connecting harness switch so they can be worn by themselves. Zipper and snap waist closure. Rib-knit leg cuffs. Graphics on left hip. 100% nylon ripstop. One year limited warranty. 98326-09VM fits 30-32" inseam.
|
Men's Heated Vest Liner A completely reengineered heating system integrates Nanowire™ technology and a GHC High Density Heat® system. Nanowire™ technology features a patented process of using silvered fibers stitched into a fabric and then waterproof sealed. This heating system is strategically placed throughout the garment to provide intense, but uniform heat coverage. 100% nylon ripstop vest includes wiring, instruction manual, and on/off switch for regulating heat while riding. Graphics on left chest. One year limited warranty on garment. Lifetime warranty on heating elements.
|
Men's Helmet Case 100% polyester. Zipper closure and carrying handle. Includes strap to attach to bike. Contrasting piping. Bar & Shield logo medallion on front. Woven label on side. Fits any Harley-Davidson® full face helmet. Measures 18" x 8" x 14".
|
Men's Hi-Vis Half Helmet Aramid® and fiberglass shell with high-visibility orange paint. Double D-ring chin strap. Removable, washable liner. Removable visor. Fits P&A Helmet Headset and Road Tech™ Helmet Headset with Bluetooth® 2.0 Technology (P/N 98272-09VM) using the Helmet Communication Pouch (P/N 98252-07V) sold separately. Helmet bag included. Bar & Shield logo on front. Meets DOT requirements. KBC®, 1 lb. 11 oz. Replacement Visors available: 98025-01VR, 98026-01VR and 98027-01VR.
|
Men's High Visibility Rain Suit Lightweight waterproof nylon with mesh lining. Meets military base standards for visibility. Double storm-flap zippered front with hook-and-loop closures. Two zippered hand-warmer pockets and one inside chest pocket. High visibility orange with reflective stripes across chest, sleeves and back for additional visibility. Stretch fit hood reduces bulk to fit comfortably under helmet.Pant features heat-resistant shields with extended protection on right leg. Rear-end anti-slip traction. Stirrups, removable suspenders and easy-access thigh pocket. Reflective stripes and graphics for additional visibility.
|
Men's Highway Full-Finger Gloves Made for the highway. Ready for anywhere. Leather full-finger glove features a new exclusive Gore-Tex® waterproof breathable inner liner developed for Harley-Davidson®. Pre-curved fingers, padded palm, and ergonomic thumb construction. Adjustable strap, hook loop touch fastener system, and elastic wrist closure system. Embossed Harley-Davidson® and Bar Shield logo graphics.
|
Men's Hooded Skull Sweatshirt Zippered front with drawstring hood, two hand-warmer pockets and dimensional screen-printed Harley-Davidson® graphics on sleeves, left chest, and back. appliqued and embroidered skull on left chest and back. 60% cotton, 40% polyester fleece.
|
Men's Hybrid Ultra-Light Classic Half Helmet Fits P&A Helmet Headset and Road Tech Helmet Headset with Bluetooth 2.0 Technology (P/N 98272-09VM) using the Helmet Communication Pouch (P/N 98252-07V) sold separately. Helmet bag included. Harley-Davidson medallion on sides. Meets DOT requirements. KBC, 1 lb. 6 oz. Replacement visor: 98025-01VR, 98026-01VR and 98027-01VR. Face shields: 98068-02VR, 98069-02VR and 98070-02VR.
|
Men's Hybrid Ultra-Light Spoiler Half Helmet Matte Black
|
Men's Illumination 360� Hi-Vis Vest Exclusive 360° Enhanced Visibility Reflective design helps rider be seen from nearly every angle. Water-resistant nylon. Designed to fit over leather or textile functional gear. Zipper front. Hook-and-loop side adjusters. Removable ID badge holder. Extensive 3M™ Scotchlite™ Reflective Material tape, piping, and graphics on shoulders, sides, front, and back. 3M™ Scotchlite™ Reflective Material on sides. Size M fits M-L; Size XL fits XL-2XL; Size 3XL fits 3XL-4XL.
|
Men's Illumination Leather Full-Finger Gloves Genuine leather. Ergonomic thumb. Pre-curved fingers. Envelope flex knuckles 3M™ Scotchlite™ Reflective Material. Gel-padded palm. Anti-slip grip. Neoprene cuff with adjustable closure and 3M™ Scotchlite™ Reflective Material on cuff tab. Extensive 3M™ Scotchlite™ Reflective Material tape. Bar & Shield PVC patch.
|
Men's Illumination Textile Pants with Switchback Technology Waterproof, heavy-duty 600 denier polyester outer shell with poly-mesh lining. Zip-out, waterproof pants liner. Switchback technology with zip-off vent panels that reveal mesh for air flow. Exterior body armor pockets at knees and removable foam pads at hips for extra comfort. Zipper fly with double snap. Adjustable waist tabs. Power-stretch on top of knee. Adjustable waist tabs. Heat-resistant shields on inner legs. Rear leg zipper opening to below knee with gusset. Zipper at back waist attache
|
Men's Jet II 3/4 Helmet Fiberglass shell with double D-ring chin strap and Bar & Shield shaped front intake vent. Replacement shield in clear and smoke. Harley-Davidson® graphics on side. Fits P&A helmet headset p/n 77147-98. Helmet bag included. Meets DOT requirements. HJC, 2 lbs. 13 oz.
|
Men's Leather Baseball Cap Full-grain leather cap with embroidered Bar Shield logo on front. Adjustable back strap with metal clip closure. Leather clean only.
|
Men's Long Sleeve Crew Neck Tee - Black Embroidered Bar & Shield logo on left chest and printed graphics on both sleeves. 100% cotton.
|
| Men's Long Sleeve Crew Neck Tee - WhiteEmbroidered Bar & Shield logo on left chest and printed graphics on both sleeves. 100% cotton.
|
Men's Long Sleeve Denim Shirt 100% cotton denim. Snap-down collar. Button front. Two button chest pockets. Custom neck tape. Printed graphics on left chest and upper back.
|
Men's Long Sleeve Oil Can Tee 100% cotton jersey. Crew neck. Rib-knit collar and cuffs. Printed graphics on left chest and back.
|
Men's Long Sleeve Oil Can Tee 100% cotton jersey. Crew neck. Rib-knit collar and cuffs. Printed graphics on left chest and back.
|
Men's Long Sleeve Performance Woven Shirt Moisture-wicking fabric helps keep the body cool, dry, and comfortable by drawing perspiration away from skin. Anti-microbial properties help eliminate bacteria and odors on the garment during wear. UPF-30 treatment protects against the sun's harmful rays. Snap-down collar. Button front. Two chest pockets with hook-and-loop closure. One left chest welt pocket. Back venting at shoulder seams. Roll-up sleeves with button fastener. Adjustable button cuffs. Contrasting side mesh panels. Woven label
|
Men's Long Sleeve Pre-Luxe Tee 100% cotton jersey. Two-button placket. Rib-knit collar and cuffs. Custom neck tape. Printed patch on right sleeve. Embroidered Bar & Shield logo on left chest. Printed graphics on front and back.
|
Men's Long Sleeve Prestige Tee This shirt starts with high-quality, heavyweight 100% cotton. Thick dimensional gel prints make a bold statement on the shoulders, down sleeves, and on the back with an oversized Bar Shield logo. The applique and embroidery details on the chest, sleeves, and back add to the appeal you'll get when you wear this tee.
|
Men's Long Sleeve Prestige Tee This shirt starts with high-quality, heavy weight 100% cotton. Contrast piping accents. Thick, dimensional gel printed graphics make a bold statement on the shoulders, down sleeves, and on back in the oversized Bar Shield logo. The applique and embroidered details on the chest, sleeves, and back will definitely get you noticed.
|
Men's Long Sleeve Raglan Henley 96% cotton, 4% spandex 1x1 rib. One-button placket. Raglan sleeves. Custom neck tape. Embroidered felt applique graphics on front. Embroidered graphics on back neck.
|
Men's Long Sleeve Raglan Henley 96% cotton, 4% spandex 1x1 rib. One-button placket. Raglan sleeves. Custom neck tape. Embroidered felt applique graphics on front. Embroidered graphics on back neck.
|
Men's Long Sleeve Tee with Flame Graphics - Black Print and embroidered graphics on sleeves, front, and back. 100% cotton jersey.
|
Men's Long Sleeve Tee with Flame Graphics - White Print and embroidered graphics on sleeves, front, and back. 100% cotton jersey.
|
Men's Long Sleeve Waffle-Knit Henley 100% cotton waffle-knit henley with three-button placket, embroidered patch on left chest, and embroidered graphic on back.
|
Men's Long Sleeve Waffle-Knit Henley 100% cotton waffle-knit henley with three-button placket, embroidered patch on left chest, and embroidered graphic on back.
|
Men's Long Sleeve Woven Shirt 100% cotton. Snap-down collar. Button front. Two button chest pockets. Custom neck tape. Embroidered graphics on left chest. Embroidered appliqu� graphics on upper back.
|
Men's Long Sleeve Woven Shirt 100% cotton. Snap-down collar. Button front. Two button chest pockets. Custom neck tape. Embroidered graphics on left chest. Embroidered appliqu� graphics on upper back.
|
Men's Metal Lettered Belt 100% genuine leather with zinc aluminum hardware. 1 12" wide strap. Sculpted metal letter ornaments along strap. Detachable engraved buckle.
|
Men's Motor Nylon Jacket Water-resistant 100% nylon Cordura® with poly-mesh lining. Snap-tab mandarin collar. Zipper front. Zipper cuffs. Action back. Two zipper hand-warmer pockets. One interior horizontal pocket and one interior vertical pocket. Embroidered applique graphics and patches on sleeves, front, and back.
|
Men's Motor Oil Buckle Zinc aluminum casting. Sculpted and engraved graphics. Fits any 1 1/2" Harley-Davidson® belt strap. Measures 3 5/8" x 2 5/8".
|
Men's Nostalgic Trademark Leather Ivy Cap A style as classic as the name on it. Soft, buffed-grain leather with cotton twill lining. Fitted styling. Harley-Davidson® embroidered graphics on front. Bar Shield logo embroidered graphics on back.
|
Men's Oil Can Blowout 100% cotton. Snap-down collar. Button front. Two button chest pockets. Custom neck tape. Printed graphics on left chest pocket and back.
|
Men's Oil Can Hooded Sweatshirt Extra comfortable 80% cotton, 20% polyester fleece with 100% cotton jersey lined waffle-knit hood. Zipper front with drawstring hood. Two front kangaroo-style pockets. Printed graphics on front left chest and back.
|
Men's Oil Can Key Fob 100% genuine leather and zinc aluminum. Split ring for keys. Snap hook attaches to belt loop. Sculpted medallion on front. Measures 6 1/2" x 1 5/8".
|
Men's Outdoors 3-in-1 Nylon Jacket Water-resistant 100% nylon with poly-mesh lining. Removable, long sleeve cotton hoodie for extra warmth can also be worn separately. Snap-tab mandarin collar. Zipper front. Zipper cuffs. Power-stretch side panels. Two zipper hand-warmer pockets. One interior horizontal pocket and one interior vertical pocket. Embroidered graphics on left chest. Embroidered applique graphics on front, sleeves, and back. Removable cotton hoodie features two hand-warmer pockets and applique graphics on left chest.
|
Men's Oversized Skull Knit Cap 100% cotton knit. Knit-in skull graphics on front. One size fits most.
|
Men's Oversized Skull Knit Cap 100% cotton knit. Knit-in skull graphics on front. One size fits most.
|
Men's Perforated Fingerless Gloves Genuine perforated leather gloves. Padded palms helps absorb road vibrations to reduce riding fatigue. Ergonomic thumb construction for added mobility. Elastic wrist with hook-and-loop closure. Bar & Shield logo.
|
Men's Perforated Full-Finger Gloves Durable perforated pigskin leather. Full polyester lining. Ergonomic thumb. Padded palm. Elastic wrist with adjustable hook-and-loop cuff closure. Rubberized Bar Shield logo.
|
Men's Perforated Full-Finger Gloves Genuine perforated leather gloves. Ergonomic thumb, pre-curved fingers, and adjustable hook-and-loop wrist closure with Bar & Shield logo.
|
Men's Performance Colorblocked Shirt Moisture-wicking fabric helps keep the body cool, dry, and comfortable by drawing perspiration away from skin. Anti-microbial properties help eliminate bacteria and odors on the garment during wear. UPF-30 treatment protects against the sun's harmful rays. Complete with snap-down collar, button front, two button chest pockets, and back vents. Embroidered applique graphics on back. 55% cotton, 45% polyester twill.
|
Men's Performance Microstripe Woven Shirt Moisture-wicking fabric helps keep the body cool, dry, and comfortable by drawing perspiration away from skin. Anti-microbial properties help eliminate bacteria and odors on the garment during wear. UPF-30 treatment protects against the sun's harmful rays. Snap-down collar. Button-front. Two button chest pockets. Back vents. Embroidered graphics and woven label on left pocket. 60% cotton, 40% polyester.
|
Men's Phantom Ghost Baseball Cap Washed twill. Tone-on-tone 3-D Bar Shield logo embroidered graphics and slider closure.
|
Men's Pre-Luxe Baseball Cap 100% brushed cotton twill with heavy enzyme wash. Contrasting bill. Embroidered graphics on front. Adjustable back closure.
|
Men's Pre-Luxe Knit Cap Printed graphics on front. One size fits most. 55% acrylic, 45% cotton.
|
Men's Prestige Blowout 100% cotton twill shirt with snap front and blowout sleeve styling. Appliqu� graphics on chest and embroidered graphic on left shoulder. Large embroidered and appliqu� graphics on back.
|
Men's Prestige Fitted Baseball Cap Colorblock design with felt applique on front and embroidered graphics on bill and back. 100% brushed cotton twill. Fitted styling.
|
Men's Prestige Fitted Baseball Cap 100% brushed cotton twill. Colorblocked design with felt applique on front and embroidered graphics on bill and back. Fitted styling.
|
Men's Prestige Hooded Pullover Sweatshirt Make a bold statement with this 80% cotton, 20% polyester sweatshirt fleece with 100% cotton thermal lined hood. Pullover with drawstring hood. One front kangaroo-style pocket. Contrasting color detail on shoulders, sleeves, and front. Patches on sleeves and applique graphics on front.
|
Men's Prestige Hooded Pullover Sweatshirt Make a bold statement with this 80% cotton, 20% polyester sweatshirt fleece with 100% cotton thermal lined hood. Pullover with drawstring hood. One front kangaroo-style pocket. Contrasting color detail on shoulders, sleeves, and front. Patches on sleeves and applique graphics on front.
|
Men's Prestige Nylon Bomber Jacket Water-resistant 100% nylon with quilted poly-twill lining. Rib-knit collar, waist, and cuffs. Zipper front. Action back. Two zipper hand-warmer pockets. One interior horizontal pocket and one interior vertical zipper pocket. Contrasting piping on shoulders and sleeves. applique and embroidered graphics on sleeves, front, and back. Embroidered graphics down sleeves.
|
Men's Prestige Nylon Bomber Jacket Water-resistant 100% nylon with quilted poly-twill lining. Rib-knit collar, waist, and cuffs. Zipper front. Action back. Two zipper hand-warmer pockets. One interior horizontal pocket and one interior vertical zipper pocket. Contrasting piping on shoulders and sleeves. applique and embroidered graphics on sleeves, front, and back. Embroidered graphics down sleeves.
|
Men's Profile Performance Eyewear Convertible eyewear provides two pairs of protection in one: performance eyewear and sunglasses. A specially designed patent pending detachable foam mid-frame snaps into place to seal out the elements and keep eyes from tearing while riding. At the end of the ride, the mid-frame snaps out to convert the goggles to a great pair of sunglasses. Smoke eyewear includes interchangeable clear lenses for night riding. Meets ANSI Z87.1 standards. Comes with hard case and microfiber bag. Replacement lenses available.
|
Men's Reflective Skull Rain Suit Breathable, waterproof 100% polyester with full mesh lining. Zipper front with hook-and-loop storm flap. Fully seam sealed. Elastic cuffs with hook-and-loop closure. Adjustable bungee cord hem. Zip-off, removable helmet-friendly hood. Two zipper hand-warmer pockets and one zipper chest pocket. 3M™ Scotchlite™ Reflective Material piping on shoulders and sleeves. 3M™ Scotchlite™ Reflective Material heat-transfer skull graphics on back. Allover ghosted skull graphics. Pants feature heat-resistant shield on inner legs, rear-end anti-slip traction, stirrups, suspenders, and full leg side zipper. 3M™ Scotchlite™ piping and graphics on legs.
|
Men's Reflective Skull Waterproof Hoodie Waterproof, seam-sealed 100% knit polyester fleece in a new softer fabric with laminated backing. Guardian Technology at elbows and shoulders for added abrasion resistance. Zipper front with bungee cord and toggle hood. Hoodie features watertight storm cuffs, adjustable bungee cord hem, and two zipper kangaroo-style pockets. 3M™ Scotchlite™ Reflective Material appliqué graphics on front, back, shoulders and elbows.
|
Men's Retro Logo Race Baseball Cap 100% cotton twill. Embroidered graphics on bill and front. Adjustable back closure.
|
Men's Reversible Oil Can Knit Cap Printed graphic on front reverses to embroidered Harley-Davidson® graphic. One size fits most. 100% cotton.
|
Men's Reversible Oil Can Knit Cap 100% cotton. Printed graphic on front reverses to embroidered Harley-Davidson® graphic. One size fits most.
|
Men's Reversible Skull Knit Cap 100% cotton. Allover printed skull graphics reverses to embroidered Harley-Davidson® graphics. One size fits most.
|
Men's Ride Ready Full-Finger Leather Gloves Durable pigskin. Padded palms. Ergonomic thumb. Pre-curved fingers. Adjustable hook-and-loop wrist closure. Rubberized Bar & Shield logo with flames patch.
|
Men's Ride Ready Full-Finger Mesh Gloves Stretch nylon mesh. Suede palm. Ergonomic thumb. Pre-curved fingers. Adjustable hook-and-loop wrist closure. Rubberized Bar & Shield logo with flames patch.
|
Men's Ride Ready Mesh Jacket 100% polyester mesh. Body armor pockets at shoulders and elbows fit lightweight body armor available in the FXRG® line. Hydration pockets fit Hydration Packs sold separately. Adjustable hook-and-loop tabs at cuffs and waist. Two zipper hand-warmer pockets and one inside chest pocket. Reflective 3M™ Scotchlite™ Material piping on chest, sleeves and back. Printed and embroidered graphics on left chest and back.
|
Men's Ride Ready Textile Jacket Water-resistant 100% nylon shell with mesh lining. Mandarin collar with snap-tab. Underarm grommets for venting. Body armor pockets at shoulders and elbows fit lightweight body armor available in the FXRG® line. Two zipper hand-warmer pockets and two zipper chest pockets. One interior zipper vertical pocket and one interior horizontal pocket. Embroidered graphics on left chest, back and sleeves.
|
Men's Road Warrior 3-in-1 Cotton Canvas Jacket - Black 100% cotton canvas. Removable cotton-polyester hooded vest for extra warmth can also be worn separately. Snap-tab mandarin collar. Zipper front with windflap. Action back, snap cuffs, and snap waist tabs. Two zipper hand-warmer pockets, two snap chest pockets, and two inside pockets. Epaulettes and underarm grommet detail. Embroidered graphics on left chest. Embroidered and appliqued graphics on back. Removable hooded vest features two snap hand-warmer pockets and embroidered graphics on left chest.
|
Men's Road Warrior 3-in-1 Cotton Canvas Jacket - Olive 100% cotton canvas. Removable cotton-polyester hooded vest for extra warmth can also be worn separately. Snap-tab mandarin collar. Zipper front with windflap. Action back, snap cuffs, and snap waist tabs. Two zipper hand-warmer pockets, two snap chest pockets, and two inside pockets. Epaulettes and underarm grommet detail. Embroidered graphics on left chest. Embroidered and appliqued graphics on back. Removable hooded vest features two snap hand-warmer pockets and embroidered graphics on left chest.
|
Men's Roadway Leather Jacket Midweight leather jacket with poly-mesh lining. Two front intake vents, two vertical back exit vents, and shoulder venting. Body armor pockets at elbows and shoulders. Mandarin collar with two-way zipper front and action back. Pre-curved sleeves with two-way zipper cuff vents and two zipper hand-warmer pockets. Interior pocket system with one horizontal pocket, one vertical pocket, and MP3 player pocket. Embroidered and leather appliqué graphics on front and back.
|
Men's Short Sleeve Colorblock Woven Shirt 100% cotton twill. Snap-down collar. Button front. Custom neck tape. Embroidered patches on sleeves. Embroidered graphics on front and back.
|
Men's Short Sleeve Colorblock Woven Shirt 100% cotton twill. Snap-down collar. Button front. Custom neck tape. Embroidered patches on sleeves. Embroidered graphics on front and back.
|
Men's Short Sleeve Colorblocked Garage Shirt Button front 100% cotton twill shirt. Garage shirt styling with colorblock design and two chest pockets. Patch on right sleeve, embroidered graphics on left chest, and large embroidered graphics on back.
|
Men's Short Sleeve Colorblocked Garage Shirt Button front 100% cotton twill shirt. Garage shirt styling with colorblock design and two chest pockets. Patch on right sleeve, embroidered graphics on left chest, and large embroidered graphics on back.
|
Men's Short Sleeve Oil Can Garage Shirt 100% cotton twill with button front and two button chest pockets. Printed distressed graphics on left chest and on back.
|
Men's Short Sleeve Oil Can Garage Shirt 100% cotton twill with button front and two button chest pockets. Printed distressed graphics on left chest and on back.
|
Men's Short Sleeve Performance Woven Shirt Moisture-wicking fabric helps keep the body cool, dry, and comfortable by drawing perspiration away from skin. Anti-microbial properties help eliminate bacteria and odors on the garment during wear. UPF-30 treatment protects against the sun's harmful rays. Snap-down collar. Button front. Two chest pockets with hook-and-loop closure. One left chest welt pocket. Back venting at shoulder seams. Contrasting side mesh panels. Contrasting stripes on sleeves. Woven label on left chest pocket. Embroider
|
Men's Short Sleeve Pre-Luxe Woven Shirt 100% cotton. Snap-down collar. Button front. Printed patch on right sleeve. Embroidered graphics on left chest. Printed graphics across chest. Combination printed, appliqu�, and embroidered graphics on back.
|
Men's Short Sleeve Pre-Luxe Woven Shirt 100% cotton. Snap-down collar. Button front. Printed patch on right sleeve. Embroidered graphics on left chest. Printed graphics across chest. Combination printed, appliqu�, and embroidered graphics on back.
|
Men's Short Sleeve Prestige Colorblocked Garage Shirt Button front shirt with two chest pockets and patches on both sleeves. Contrast piping accents, embroidered graphics on right chest, and large embroidered graphics on back. 55% cotton, 45% poly.
|
Men's Short Sleeve Skull Garage Shirt Button front. Garage shirt styling. Two button chest pockets. Embroidered skull graphics on left pocket. Large applique and embroidered skull graphics on back. 60% cotton, 40% polyester twill.
|
Men's Short Sleeve Woven Shirt 100% cotton twill. Snap-down collar. Button front. Two button chest pockets. Custom neck tape. Embroidered graphics on left pocket. Printed and embroidered graphics on back.
|
Men's Short Sleeve Woven Shirt 100% cotton twill. Snap-down collar. Button front. Two button chest pockets. Custom neck tape. Embroidered graphics on left pocket. Printed and embroidered graphics on back.
|
Men's Short Sleeve Woven Shirt with Winged Bar & Shield Logo 100% cotton twill. Snap-down collar. Button front. Left chest pocket. Printed graphics on chest pocket and back.
|
Men's Short Sleeve Woven Shirt with Winged Bar & Shield Logo 100% cotton twill. Snap-down collar. Button front. Left chest pocket. Printed graphics on chest pocket and back.
|
Men's Short Sleeve Woven Stripe Shirt 100% cotton. Snap-down collar. Button front. Two button chest pockets. Custom neck tape. Embroidered graphics on left chest and upper back. Patch on right sleeve.
|
Men's Side Flame Baseball Cap 100% brushed canvas. Embroidered graphics on front, side, and bill. Adjustable back closure.
|
Men's Skull 3-in-1 Cotton Canvas Jacket When it comes to style this jacket is a triple threat. Wear the jacket alone, or just the hooded vest, or layer them when the brisk winds begin to blow. The killer oversized skull on the back is the main attraction. Epaulettes on the shoulders and grommet detail at underarms. Two snap chest pockets and one inside pocket on jacket. Action back, snap cuffs, and adjustable snap-tabs at waist for comfort. To beat the chill, the jacket and vest each have two zipper hand-warmer pockets. The jacket is 100% cotton canvas with polyester/twill lining. The removable hooded vest lining is cotton/polyester fleece.
|
Men's Skull Bi-Fold Biker Wallet 100% genuine leather. 19" biker chain with snap leather leash. Five credit card slots, ID window, and interior zipper pocket. Debossed graphics on front. Measures 7" x 4".
|
Men's Skull Blowout 100% cotton canvas. Snap-down collar. Button front. Two button chest pockets. Custom neck tape. Embroidered applique graphics on left chest pocket and back.
|
Men's Skull Cash Clip Wallet 100% genuine leather. Four credit card slots, ID window, and center cash clip. Debossed graphics on front. Measures 4 1/4" x 3 1/4".
|
Men's Skull Flat Top Cap Cotton lining. Debossed graphics on front and embroidered Bar & Shield logo on back. 72% cotton, 28% polyester.
|
Men's Skull Flat Top Cap Cotton lining. Debossed graphics on front and embroidered Bar Shield logo on back. 72% cotton, 28% polyester.
|
Men's Skull Full-Finger Airflow Gloves Lightweight fabric with pigskin leather palms, stretch forchettes, and adjustable hook-and-loop wrist closure with skull graphic.
|
Men's Skull Full-Finger Mechanic's Gloves 100% nylon spandex. Synthetic leather palm. Ergonomic thumb. Pre-curved fingers. Elastic wrist with hook-and-loop closure. Rubberized skull graphic.
|
Men's Skull Full-Finger Mesh Gloves Lined stretch nylon mesh gloves featuring power-stretch across the knuckles. Ergonomic thumb and pre-curved fingers provide a more comfortable fit and added mobility. Adjustable hook-and-loop wrist closure. Reflective piping and skull rubberized patch.
|
Men's Skull Leather Fingerless Gloves Genuine leather gloves featuring nylon reinforced stitching for extended wear. Gel-padded palms for shock absorption. Quick-release pull tabs, side entry and removal, and leather tab with skull rubber inlaid graphic.
|
Men's Skull Money Clip Raw nickel finish. Spring clip won't lose spring retention. Holds most paper currencies. Engraved skull graphic. Measures 1 1/4" x 2 3/4". Made in USA.
|
Men's Skull Nylon Jacket UV-resistant and water-resistant 100% nylon jacket. Zipper front, zipper cuffs, and rib-knit collar and waistband. Two zipper hand-warmer pockets. Embroidered applique graphics down sleeves, on left chest, and on back.
|
Men's Skull Shirt Jacket 100% cotton canvas with cotton lining and poly sleeve lining. Snap-down collar. Snap front. Two snap flap chest pockets. Adjustable snap cuffs. Custom neck tape. Embroidered appliqu� graphics on left chest pocket and back.
|
Men's Skull Stretch Baseball Cap Poly/cotton/spandex provides stretch fit. Tonal 3-D skull embroidered graphics on front.
|
Men's Skull Tri-Fold Short Biker Wallet Genuine leather. 19" biker chain with snap leather leash. ID window and two interior utility pockets. Debossed graphics on front. Measures 4 1/2" x 3 1/2".
|
Men's Skull Wind-Resistant Face Mask Lightweight, stretchable Wind Pro® fleece is 80% wind-resistant. Wear alone or under a helmet. Heat-stamped graphics.
|
Men's Skull Wind-Resistant Knit Hat Lightweight, stretchable Wind Pro® fleece is 80% wind-resistant. Wear alone or under a helmet. Heat-stamped graphics.
|
Men's Skull Wind-Resistant Neck Gaiter Lightweight, stretchable Wind Pro® fleece is 80% wind-resistant. Wear around your neck for extra warmth or pull it up to cover your mouth, nose, and ears. Heat-stamped graphics.
|
We Securely Accept All Major Credit Cards
Support@BikerClothesForLess.Com
Shopping Cart
| Items: | 0 |
| Subtotal: | $0.00 |
FREE Shipping On All Orders $100 or More!
* within the lower 48 US States